Busch-Remote control IR manual and wall-mounted transmitter alpha

Radio-controlled remote control light

Busch-Remote control IR manual and wall-mounted transmitter

Switch and rule from the sofa

  • Control light sources as well as blinds, awnings, etc. by remote control
  • You can switch and dim the lighting at the touch of a button
  • No operation of the switch needed 
  • In the process, the possibility to control your blinds in this manner is unique.

Remote control

The Busch-Remote control® IR builds the heart of the system. It lets you trigger all functions of the system as required. In practical terms this means that the installed Busch-Remote control IR receivers can be individually switched and dimmed. The memory function (Memo 1/Memo 2) allows special light situations to be stored and called up again at any time via the press of a button.

Wall-mounted transmitter

The Busch-Remote control® IR wall-mounted transmitter as the central control element is the ideal complement to the radio remote control. Independent of the mains and attachable to any point in the room, including the window pane, it controls the memo function or individual consumers and makes sure the consumers are switched off safely (EVERYTHING OFF) when everyone leaves the room. Available in the colours of the alpha switch range.

Dimming from a distance

With a Busch-Remote control IR control element, loads up to 420 W (with a capacity boost up to 735 WVA) can be comfortably dimmed remotely via a universal dimmer. At the same time, the dimmer allows the connection of 230 V incandescent and halogen lamps, as well as low-voltage halogen lamps with conventional or electronic transformers due to its intelligent control system. The memory function saves the value of the last set brightness.

Switching high loads from a distance

The  Busch-Remote control® IR control element is used on a Busch universal relay insert wherever high loads need to be switched remotely. With a switching capacity of 2,300 W/VA, even large systems have sufficient reserves.

Switching lights with plugs from a distance

With the Busch-Remote control IR switch with adaptor plug, mobile consumers can be connected without extensive installation. Suitable for incandescent lamps, 230 V halogen lamps and low-voltage halogen lamps that are operated via transformers. Any consumers with a connected load of up to 2,300 W can be operated.

Remote control of fans

Lighting and fans are controlled via the Busch-Universal 2-gang insert with IR control element. The flush-mounted insert is operated via remote control and switches the lighting with the first output and the fan with the second output. After the lighting is switched off, the fan keeps running up to the programmed time.