Functions at a glance

• Master presence detector with mixed light measurement.
• For switching lighting systems that depend on brightness and movement.
• With electronic switch contact for LED operation.
• Detection range (for installation height of 3 m): circular
• Seated persons: up to Ø 6.5 m, walking persons: up to Ø 8 m.
• Extension of the detection range by means of master/slave combination.
• Visible height 23 mm.
• For semiautomatic and fully automatic operation.
• Additional activation/deactivation possibility through pushbutton input.
• With continuous light/continuous off function (8 hours), activation via intelligent extension unit input possible.
• With brightness-independent test mode for evaluating the detection zone.
• With teach-in function of the brightness switching threshold, IR service remote control required.
• With detection display in test mode.
• Ceiling installation using integrated spring bracket.
• Twist protection via additional quick tensioning.
• Adjustment elements accessible on the front side.
• Surveillance density: 48 sectors with 496 switching segments.
• Switch-off delay: approx. 1 min. - 30 min. or short-time pulse 1s adjustable.
• Remote control possible via IR service remote control 6843.
• Suitable for false ceilings with a board thickness from 9 to 25 mm.
• Hole size: Ø 68 mm.

• Control element: 2 controllers for setting the brightness switching threshold and switch-off delay.
• Display elements: LED detection and status indication.

• Rated voltage: 110 V~230 V~, +10 % / -10 %
• Rated frequency: 50 Hz / 60 Hz
• Power dissipation: 0.3 W

• Outputs: 1 Normally open contact, potential-bound
• suitable for: 230 V incandescent lamps
  • Rated output: 3 - 200 W
• suitable for: 230 V~ LEDi, typical
  • Rated output: 3 - 200 W/VA

• Protection class (device): IP 40
• Temperature range (device): -5 °C - 45 °C
• Brightness limit value: 5 Lux
• Detection angle: 360 °

• Dimensions: (L x W x D): 94 mm x 94 mm x 59 mm
• Mounting depth: 36 mm
• Mounting height: 2 m - 4 m

• The detection range with a central approach is reduced.
• Recommendation: HaloX^® 100 from Kaiser (article no. 1281-00) with corresponding cover (1281-01 or 1281-61 for exposed concrete) or IBTronic H120-68 from Spelsberg

• RAL colour number: Ähnlich 9006