Functions at a glance

• Master presence detector with mixed light measurement.
• For regulating and switching of DALI operating devices that depend on brightness and movement.
• For DALI broadcast operation (central telegram).
• Supplies the required voltage for additional DALI operating units and controllers.
• Suitable for up to 45 DALI operating devices.
• For changing the colour temperature of >tunable white< lamps, which meet DALI Standard IEC 62386-209 (Device Type 8).
• Colour temperature can then be set between 2,700 K - 6,500 K.
• With additional switching output for the activation of heating, air conditioning and ventilation or for switching additional loads (e.g. panel light).
• Configuration possible up to the complete deactivation of the DALI operating devices.
• With Bluetooth interface for parameterization and operation.
• Adjustment of all setting options via smartphone or tablet.
• Light control via smartphone or tablet app.
• Detection range (for installation height of 3 m): rectangular
• Walking persons: crosswise to the detector 30 m x 3 m, frontal 20 m x 3 m.
• Extension of the detection range by means of master/slave combination.
• Mounting height 27 mm.
• For semi-automatic, comfort and fully automatic operation.
• Additional activation/deactivation possibility through pushbutton input.
• With continuous light/continuous off function (8 hours), activation via intelligent extension unit input possible.
• With time-controlled basic illumination function.
• With selectable warm-up function for fluorescent lamps.
• With 2-step automatic switch-off (according to EnEV / EN 15232).
• With time-controlled night anti-glare function.
• With selectable presence simulation in case of non-presence.
• With integrated storage of ON period (energy monitor).
• With brightness-independent test mode for evaluating the detection zone.
• With detection display in test mode.
• Ceiling installation using integrated spring bracket.
• Twist protection via additional quick tensioning.
• Adjustment elements accessible on the front side.
• Surveillance density: 92 sectors with 368 switching segments.
• Individual deactivation and adjustment of sensitivity of individual sensors possible.
• Switch-off delay: approx. 1 min. - 30 min. adjustable.
• With selectable dynamic switch-off delay.
• Suitable for false ceilings with a board thickness from 9 to 25 mm.
• Hole size: Ø 68 mm.

• Control element: 2 controllers for setting the brightness switching threshold and switch-off delay.
• Display elements: LED detection and status indication.

• Rated voltage: 110 V~230 V~, +10 % / -10 %
• Rated frequency: 50 Hz / 60 Hz
• Power dissipation: 0.3 W

• Outputs: 1 Normally open contact, potential-bound
• suitable for: 230 V incandescent lamps
  • Rated output: 1380 W
• suitable for: 230 V~ LEDi, typical
  • Rated output: 200 W/VA

• Control/Signal outputs: 1 DALI channels, independent
• Rated current value: 100 mA
• Output voltage suitable for: 16 V-

• Protection class (device): IP 40
• Temperature range (device): -5 °C - 45 °C
• Brightness limit value: 5 Lux
• Detection angle: 360 °

• Dimensions: (L x W x D): 94 mm x 94 mm x 87 mm
• Mounting depth: 60 mm
• Mounting height: 2 m - 4 m

• In combination with a relay/contactor, an RC suppressor 6899 has to be used.
• Free app for iOS and Android available in the App Store or Play Store.
• Recommendation: HaloX^® 100 from Kaiser (article no. 1281-00) with corresponding cover (1281-01 or 1281-61 for exposed concrete) or IBTronic H120-68 from Spelsberg

• RAL colour number: Ähnlich 9016