Movement detector/switch actuator, 1gang
for ABB-free@home®

Functions at a glance

  • With select lens for detection with animal access.
  • For automatic switching of ABB-free@home® actuators dependent on movement and brightness.
  • Switch-off delay of the actuator can be programmed via the web interface of the System Access Point.
  • For switching 127 V~/230 V~ consumers.
  • With integrated switch actuator.
  • Switching function is available also without prior programming (pre-configured).
  • Configuration can be changed later via the web interface (groups, scenes, etc.).
  • The bus can be connected via enclosed terminal block.
  • When installing in the flush-mounted box, a spatial division between the bus cable and 127 V/230 V installation cable is to be adhered to! If this minimum distance is not possible, use electronic boxes or insulating tubes.
  • Bus voltage: 24 V
  • Outputs: 1 Normally open contact, potential free
  • suitable for: ohmic
    • Rated output: 2300 W
    • Rated current: 10 A
  • suitable for: capacitive
    • Rated output: 2300 VA
    • Rated current: 10 AX
  • Protection class (device): IP 20
  • Temperature range (device): -5 °C - 45 °C
  • Storage temperature range: -20 °C - 70 °C
  • Detection range: frontal: 6 m, lateral: 3 m
  • Detection range 2:
  • Brightness limit value: 1 Lux
  • Detection angle: 180 °
  • Dimensions: (L x W x D): 71 mm x 71 mm x 53 mm
  • Mounting depth: 32 mm
  • Position for installation: vertical
  • Mounting height: 1.1 m - 1.3 m
  • Programming only with bus voltage applied via the web interface of the System Access Point.
  • Additional information about commissioning and operation is contained in the system manual and the online operating manual of the current Online-Catalogue.
  • Surface painted.

Order details

Article No.:6215/1.1-866
Order No.:2CKA006220A0428
EAN:4011395202708
Customs tariff number:85365080
Price group:24
Price:166,00 EUR plus VAT
Info sheet:Download PDF
Dimensions
Wiring diagram