Functions at a glance

• With select lens for detection with animal access.
• Communication with the free@home system is carried out wireless.
• For automatic switching of ABB-free@home^® actuators dependent on movement and brightness.
• Switch-off delay of the actuator can be programmed via the web interface of the System Access Point.
• For switching 230 V~ consumers.
• With integrated switch actuator.
• Switching function is available also without prior programming (pre-configured).
• Configuration can be changed later via the web interface (groups, scenes, etc.).
• 3 wire connection (neutral conductor required).
• With 230 V extension unit input (On/Off).
• With fixing claws.

• Rated voltage: 230 V~
• Rated frequency: 50 Hz / 60 Hz

• Outputs: 1 Normally open contact, potential-bound
• suitable for: ohmic
  • Rated output: 2300 W
  • Rated current: 10 A
• suitable for: capacitive
  • Rated output: 2300 VA
  • Rated current: 10 AX
• suitable for: LEDi and energy-saving bulbs; typical
  • Rated output: 100 W/VA

• Protection class (device): IP 20
• Temperature range (device): -5 °C - 45 °C
• Storage temperature range: -20 °C - 70 °C
• Detection range: frontal: 6 m, lateral: 3 m
• Detection range 2:
• Brightness limit value: 1 Lux
• Detection angle: 180 °

• Dimensions: (L x W x D): 71 mm x 71 mm x 53 mm
• Mounting depth: 32 mm
• Position for installation: vertical
• Mounting height: 1.1 m - 1.3 m

• Programming via the web interface of the System Access Point.
• Additional information about commissioning and operation is contained in the system manual and the online operating manual of the current Online-Catalogue.