Functions at a glance

• For controlling blind or awning motors.
• With integrated blind actuator.
• Blind function is available also without prior programming (pre-configured).
• Configuration can be changed later via the web interface (groups, scenes, etc.).
• For contacting 1gang rocker 6230-10-xxx, 6231-10-xxx, 6232-10-xxx, 6233-10-xxx und 6234-10-xxx.
• The bus can be connected via enclosed terminal block.
• When installing in the flush-mounted box, a spatial division between the bus cable and 127 V/230 V installation cable is to be adhered to! If this minimum distance is not possible, use electronic boxes or insulating tubes.

• Control element: Switch contacts top/bottom
• Display elements: LED as light for orientation or display of the switching state

• Bus voltage: 24 V

• Outputs: 2 Change-over contacts/normally open contact, potential-bound
• suitable for: Operation mode Blind
  • Rated output: 920 VA
  • Rated current: 4 A

• Protection class (device): IP 20
• Temperature range (device): -5 °C - 45 °C
• Storage temperature range: -20 °C - 70 °C

• Dimensions: (L x W x D): 71 mm x 71 mm x 45 mm
• Mounting depth: 32 mm

• Programming only with bus voltage applied via the web interface of the System Access Point.
• Additional information about commissioning and operation is contained in the system manual and the online operating manual of the current Online-Catalogue.